YG-1 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 6.25'' Overall Length, 0.75'' Cutting Diameter, 0.75'' Shank Diameter


YG-1 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 6.25'' Overall Length, 0.75'' Cutting Diameter, 0.75'' Shank Diameter by YG-1 at Sterling Tool Supply. MPN: 19109. Hurry! Limited time offer. Offer valid only while supplies last. The YG-1 E1072 uncoated high-speed steel extra-long-length square nose end mill has a 42-degree helix angle, two flutes, and a center-cutting design for general-purpose machining on aluminum and other nonferrous materials. The 42-degree helix angle offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. Extra-long-length end mills have longer cutting edges than long-length end mills for applicat


YG-1 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 6.25'' Overall Length, 0.75'' Cutting Diameter, 0.75'' Shank Diameter by YG-1
4.3 out of 5 stars with 17 reviews
Condition: New
Availability: In Stock
$60.82


Quantity:  

 


Product Description & Reviews

The YG-1 E1072 uncoated high-speed steel extra-long-length square nose end mill has a 42-degree helix angle, two flutes, and a center-cutting design for general-purpose machining on aluminum and other nonferrous materials. The 42-degree helix angle offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. Extra-long-length end mills have longer cutting edges than long-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit for applications. The tool’s square end creates sharp, unrounded cuts. High-speed steel (HSS) is a common general-purpose steel for cutting tools. This tool has no coating or surface treatment. Cutting diameter tolerance is + 0.0010 to - 0.0000" for end mills with a different shank and cutting diameter and + 0.0015 to - 0.0000" for end mills with the same shank and cutting diameter. The tool has a Weldon shank. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. YG-1 manufactures drills, taps, end mills, and rotary tooling. The company, founded in 1981, is headquartered in South Korea and has a U.S. office in Vernon Hills, IL.

Features & Highlights

  • Suitable for machining on aluminum and other nonferrous materials
  • 42-degree helix provides increased cutting action compared to end mills with lower helix angles
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
  • High-speed steel for general-purpose cutting

Additional Information

Brand:
YG-1
Manufacturer:
YG-1 Tool Company
Category:
Square Nose
Model:
19109
MPN:
19109
UPC:
733438191094
Part Number:
19109
Size:
3/4 inches
Publisher:
YG-1 Tool Company
Binding:
Misc.
Item Size:
14.5 x 38 x 38 inches
Package Weight:
0.55 pounds
Package Size:
1.6 x 1.3 x 6.2 inches

 


Have questions about this item (19109), or would like to inquire about a custom or bulk order?


If you have any questions about this product by YG-1, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: Vikye03arcvo8t5, ean: 0754959905007,
Descriptions: This milling cutter set is made of high quality tungsten steel material with stable performance and long service time, with the characteristic of high toughness, good wear resistance, special high-hardness, high-speed cutting, help sa...

mpn: 55579,
The YG-1 E5065 uncoated carbide extra-long-length square nose end mill has four flutes, a center-cutting design, and a 30-degree helix angle for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleab...

mpn: AU3E-D1/2,
Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length; Flat Top with 3-Flute, Material: HRC55 Carbide with NO Coating; For Aluminum, Non-ferrous Mental, Plywood, OAK, MDF,...

mpn: DWCF328-XLCC, ean: 0887861157902,
Drill America high speed end mill designed to machine most materials of medium hardness such as steel, brass, bronze and iron. The large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal....