Power Milling Replacement Parts / Shop - Extreame Savings! Save up to 44%


Extreame Savings! Up to 44% off on Power Milling Replacement Parts (in Shop) at Sterling Tool Supply [8]. Top brands include Bridgeport, RATTMMOTOR, HHIP, Jectse, Ginyia, BOYU-SHITAI, KUNHEWUHUA, Gazechimp, HGC, Acogedor, & Utoolmart. Hurry! Limited time offers. Offers valid only while supplies last.



Bridgeport BP 11182120 Variable Speed Belt
By Bridgeport
In Stock
$136.00
$76.50
You Save: 44%

mpn: BP 11182120, ean: 0789957540110,

4.1 out of 5 stars with 30 reviews
Drive belt used on all 2 hp heads.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


Bridgeport BP 12183920 J-W/#3 RT and 2J Drawbar Assembly, 23" Length x 1/2" Width, 7/8" Handle
By Bridgeport
In Stock
$85.00

mpn: BP 12183920, ean: 0798167954372,

4.6 out of 5 stars with 8 reviews
Drawbar for no. 3 right angle attachment 2j-head only.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


Bridgeport BP 12060630 X-Axis Matched Nut Set
By Bridgeport
In Stock
$51.50

mpn: BP 12060630, ean: 0798167954648,

4.0 out of 5 stars with 55 reviews
Brass right hand nuts set used in feed nut bracket on all series i mill.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


Bridgeport BP 12190344 Micrometer Nut Assembly
By Bridgeport
In Stock
$55.00

mpn: BP 12190344,

4.5 out of 5 stars with 17 reviews
Micrometer nut on micro-screw used to stop quill movement where ever the stop is set on micro-screw.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


Bridgeport BP 11597448 Air Filter
By Bridgeport
In Stock
$48.00

mpn: BP 11597448, ean: 0696738172616,

4.5 out of 5 stars with 56 reviews
Electrical cabinet filter used on ez-trak, vmc 760, 800,1000 with dx-32 control.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


Bridgeport BP 11182106 Timing Belt, 42 Teeth, 1-1/2 hp Machine
By Bridgeport
In Stock
$40.00

mpn: BP 11182106,

4.9 out of 5 stars with 58 reviews
Timing belt used for j-head and 1.5 hp 2j-head.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


3Set Aluminum Nema23 Stepper Motor Mount Bracket Holder Clamp Support Block+12pcs Installation Screw for CNC Router Engraving Milling Machine ...
By RATTMMOTOR
In Stock
$39.99

mpn: B23, ean: 0785004502438,

4.2 out of 5 stars with 25 reviews
Package include: 3 x Nema23 installation bracket (Aluminium oxide,not oxidation blackening future)12 x Nema23 installation bracket setscrewProduct DescriptionSpecification:Material: Aluminium oxideModel: NEMA23 mounts bracket superiority:1) Our alumium motor mount surface is anodize,so it not oxidation blackening future.2) Cheap price.Model Number:For Nema23. Usage:Stepper Motor Bracket. Material:Aluminum. Standard or Nonstandard:Standard. Name:NEMA 23/57 Stepper Motor bracket.


Bridgeport BP 12060631 Y-Axis Matched Nut Set
By Bridgeport
In Stock
$62.00

mpn: BP 12060631,

4.9 out of 5 stars with 56 reviews
Brass left hand nut set used on feed nut bracket on all series i mill.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


Bridgeport BP 12190083 Quill Stop Screw
By Bridgeport
In Stock
$52.00

mpn: BP 12190083,

4.5 out of 5 stars with 48 reviews
Quill stop micro-screw used in lower housing for stopping quill up/sown movement when quill stop is set.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


HHIP 3900-0199 Quill Stop for Bridgeport Mill, 0.2000 lb
By HHIP
In Stock
$35.93
$31.35
You Save: 13%

mpn: 3900-0199, ean: 0769053016054,

4.1 out of 5 stars with 12 reviews
For Bridgeport, any other mill with 1/2''-20 stop rod.Increase productivity-reduce cost. Rapid depth setting on quill. Increase Productivity-Reduce Cost Rigid Clamping.


Blocks no Holes,Milling Mattress Block,Ultra Precision Professional Hardened Steel Block Contour milling Mattress Block Bench vice Parallel Horn Non Holes Parallel pad jig 1X2X3 inch
By Jectse
In Stock
$48.99

mpn: Jectseevut1f5yoa, ean: 0719855915833,

4.6 out of 5 stars with 59 reviews
Features: Made of precision-grade tool steel hardened and ground on all 6 sides of block. Accuracy and squareness on all sides within 0.0001 - 0.0002 inch. Suitable for clamping support, installation design and inspection work. Each block measures 1x2x3 inch in size. No holes on all 6 sides. Specification: Material: Steel Block Size: 1x2x3 inch Package List: 2 x 123 BlocksMade of precision-grade tool steel hardened and ground on all 6 sides of block.. Accuracy and squareness on all sides withi


Automatic Tool Setting Gauge, CS-90K CNC Automatic Tool DC 24V, IP 67 Waterproof for CNC Engraving Machine
By Ginyia
In Stock
$126.89
$112.09
You Save: 12%

mpn: Ginyiaagt0f4ye1v, ean: 0719233393451,

4.6 out of 5 stars with 49 reviews
Features: 1. Super hard alloy, tungsten steel material, durable. 2. Used for automatic tool setting in CNC Engraving machine. 3. Seal design, and IP67, features good dustproof and waterproof. 4. Automatic Tool Setting Gauge is NO normally open type ,with a Stroke of 5mm. 5. The alarm signal can be sent when the stroke is over. Specification: Product model:CS-90K Output mode:A:NO(normally open) Stroke:5mm Repeat positioning accuracy:0.001mm(operation speed:50-200mm/min) Waterproof level: IP 67 L


CNC electric Milling XYZ Axis Sliding Table Electric Slider Module 300mm/600mm/800mm Linear SFU1605 Ballscrew USA STOCK (300mm)
By BOYU-SHITAI
In Stock
$279.00

ean: 0760385651807,

4.6 out of 5 stars with 12 reviews
All the products are shipped from US warehouse(CA or NJ)! All the products are shipped from US warehouse(CA or NJ)! All the products are shipped from US warehouse(CA or NJ)! Features : 1. Horizontal load: 200kg 2. Vertical load: 50kg 3. Stroke:300mm/ 600mm/800mm 4. Ball screw type: 1605 (diameter 16mm, lead 5mm ) 5. Ball screw accuracy: c7 6. Stepper motor: not included(provide 57 stepper motor base) 7. Repeat positioning accuracy: ± 0.02mm 8. Material: Aviation Aluminum 6061 Package included :


Bridgeport BP 12201033 Quill Down-Fee Assembly Handle
By Bridgeport
In Stock
$52.00

mpn: BP 12201033, ean: 0798167954518,

4.5 out of 5 stars with 50 reviews
Quill feed handle used for up and down on j and 2j heads.Genuine Bridgeport Knee Mill replacement part. Manufactured to OEM specifications. Sourced directly from Hardinge- the only authorized provider of Bridgeport knee mills, parts and service.


KUNHEWUHUA 99% 3mm Alumina Ceramic Grinding Ball Alumina Corundum Grinding Ball Alumina Grinding Media Bead Milling Media for Lab Planetary Ball Mill
By KUNHEWUHUA
In Stock
$183.00

ean: 7597712942832,

4.2 out of 5 stars with 20 reviews
Features: ★ Long service life, low wear and can be used repeatedly★ The color of white,can not influence the color of grinded materials★ High grinding efficiency,Low grinding time,To save energy and costs★ Superior physical performance,High strength, High hardness, High wear resistance, High temperature resistance★ Superior chemical performance,Corrosion resistance★ Diverse size, Standard Spherical, No deformation, Smooth surface without pitsSpecifications:Item: Alumina Ceramic Grind


gazechimp Shoulder Milling Cutter Carbide Inserts APMT1604/1135 - APMT1604PDER VP200
By Gazechimp
In Stock
$31.99

mpn: fb4b297396ddaffb3e44e1b206f00dec, ean: 0766412566656,

4.9 out of 5 stars with 59 reviews
Description: - 5-style to meet your different requirements. Including 10pcs carbide inserts per box. Using LATUMA coating, high quality. - VP5525 (classic style): Suitable for processing steel parts, cast iron, etc. within 35 degrees. - VP5530 (classic style): Suitable for processing steel parts, cast iron, etc. within 50 degrees. - VP4008 (General model): General processing of HRC 55 degrees steel, cast iron and stainless steel. - VP100 (Wear-resistant): General processing of HRC 52 degrees ste


HGC 10pcs CAT40 45° Pull Stud Retention Knob Fits Hass CAT 40 CNC
By HGC
In Stock
$32.80

ean: 0732694106637,

4.1 out of 5 stars with 33 reviews
Fits on Amura-Seiki, comet, Daewoo, Dah Lih, Hass, Howa Kogyo, Ikegal, Kearny-Trecker, Kia, Kitamura, Mitsubishi, Miyano, OKK, Okuma Howa, Roku-Roku, Toshiba, Toyoda, YCI, Sharp 10 x CAT40 45° Pull Stud This pull stud is compatible with the following: TJ Davies PS-532 X 45 Lyndex C40S-4500 Collis 64712 Feature: 1、Using high quality alloy steel 20CrMnTi forging, the material is metallographic dense, uniform and stable. 2、After carburizing, the outside of material is hardened, and the insid


DC Spindle Motor, CNC Spindle Milling Motor, DC 48V 300W CNC Spindle Air Cooled Milling Motor, igh Speed Spindle Motor Brushed CNC Router, CNC Spindle Motor, for CNC Router Machine
By Acogedor
In Stock
$79.99

mpn: Acogedora069wyqpgt, ean: 0737983943252,

4.2 out of 5 stars with 60 reviews
Specification:Material: Stainless steel Weight: 951g/33.5oz Spindle motor: new brushed DC motor (easy to replace external carbon brush) Working voltage: DC 48V (direct current) Power: 300W Speed: 12000 RPM Distance: 400 mN.m Insulation resistance: >2 MΩ Dielectric strength: 400V Diameter: 52mm high-grade black frosted fuselage Chuck Part Length: 35mm at the tool rod part (including nuts and clamps of 43mm) Chuck Part Diameter: 16mm Motor Total Length: 185mm (including clamping position and moto


Utoolmart Woodworking tools V-shaped knife 40 Three-blade 90 degrees Cutting Diameter HSS Chamfer Milling Cutter Bit for Woodworking Carpentry
By Utoolmart
In Stock
$49.51
$37.13
You Save: 25%

mpn: UT190928D-0122, ean: 6218911713962,

4.6 out of 5 stars with 15 reviews
Product description:100% New and High Quality!!!Color: SilverMaterial: Cemented CarbideMinimum number of packages:1Attention1. Please Remember That Because Of The Lighting Effects, Monitor The Brightness / Contrast Settings / 'S Etc, There Will Be Some Slight Differences In The Color Tone Of The Pictures And The Actual Single. Please Allow 1-2cm Difference By Manual Measurement.2. Feel Free To Leave Us A Message If You Have Any Questions. We Will Respond Within 24 Hours And Offer You Our Best


Wireless Handwheel Controller ,CNC Handwheel Manual Pulse Generator, for CNC Lathe Engraving Milling Machine
By Acogedor
In Stock
$406.99
$239.69
You Save: 41%

mpn: Acogedorsg8q4ibago, ean: 0765613727668,

4.0 out of 5 stars with 51 reviews
Specification: Condition: 100% Brand New Model: AWGP03-6AA-3 Material: ABS, PC Alloy Wireless Transmission parameters CommunicationChannels ISM 433M Power 2 * Alkaline AA Battery(not included) Wireless Transmission Distance Accessibility 60m DC Electrical Parameters Handheld operating voltage 2.2-3.3V(2 * AA Alkaline battery) Average operating Current Less than 10 mA; low power design, battery life is greater than 30 days Receiver operating voltage 5V, 12V,24V Average operating



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sterlingtoolsupply.com. All Rights Reserved.