Vacuum & Dust Collector Parts / Vacuum & Dust Collector Accessories - Extreame Savings! Save up to 42%


Extreame Savings! Up to 42% off on Vacuum & Dust Collector Parts (in Vacuum & Dust Collector Accessories) at Sterling Tool Supply [74]. Top brands include iVAC, Taytools, Kenmore, Bosch, Dastool, SawStop, Festool, Hardin, Dyson, Vacuum, & Makita. Hurry! Limited time offers. Offers valid only while supplies last.



iVAC PRO 240-Volt Remote Control for Dust Collectors
By iVAC
In Stock
$89.99

mpn: RS24020NA, ean: 0632181465349,

4.3 out of 5 stars with 45 reviews
Automate your dust collector with the iVAC Pro Dust Collector Remote Switch! Choose the Remote Switch that matches your dust collector's voltage, and enjoy the convenience of a remote control unit to turn your dust controller on and off with the press of a button. iVAC allows you to grow into a complete iVAC Pro system, including Tool Sensors and Blast Gates, and it's capable of reliably driving 240V dust collectors up to 2HP repeatedly ON/OFF over and again - now that's real power!Fully certifi


Taytools 465388 Set of 6 each 4" OD Blast Gates Self Cleaning No Clog Aluminum for Dust Collection System
By Taytools
In Stock
$63.99

mpn: 465388, ean: 0700667465388,

4.4 out of 5 stars with 12 reviews
Blast gates are used to open and close dust collector branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. The outer case is made from cast aluminum with a sliding steel gate and locking knob. Typical blast gates allow debris to accumulate in the groove preventing the gate from closing fully, causing leaking and reducing suction. The slot on these units extends enti


Kenmore KC83QDKNZV06 Vacuum Floor Brush Genuine Original Equipment Manufacturer (OEM) Part
By Kenmore
In Stock
$39.83
$34.99
You Save: 12%

mpn: KC83QDKNZV06,

4.0 out of 5 stars with 45 reviews
Genuine Original Equipment Manufacturer (OEM) parts! This floor brush (part number KC83QDKNZV06) is for vacuums. Floor brush KC83QDKNZV06 attaches to the wand assembly and is for cleaning hard flooring such as hardwood, vinyl and tile. Follow the instructions in the owner's manual when installing this part. For Kenmore Elite.This part is compatible with models including; 11621614015,11623204111C,11681714510,12581714610,11621714111,11621614011,11621614012,11623206111C,11621614013,11621714110,1162


Kenmore KC99PDGWZV06 Vacuum Wand, Lower Genuine Original Equipment Manufacturer (OEM) Part
By Kenmore
In Stock
$38.63
$36.96
You Save: 4%

mpn: KC99PDGWZV06,

4.2 out of 5 stars with 26 reviews
Genuine Original Equipment Manufacturer (OEM) parts! This wand (part number KC99PDGWZV06) is for vacuums. Wand KC99PDGWZV06 extends the reach of the hose, and connects the hose to the floor nozzle or other cleaning attachment. Follow the instructions in your owner's manual for installing and using this part. For Kenmore.This part is compatible with models including; 11629319213,11629319214,11629319211,11629319212,11629319210,11629319802,11629319800,11629319215. This is a manufacturer substitutio


Bosch RA1173AT Dust Extraction Kit
By Bosch
In Stock
$38.40
$33.84
You Save: 12%

mpn: RA1173, ean: 0732454487600,

4.3 out of 5 stars with 32 reviews
Includes dust collection hoods for edge-forming and flat surface applications.. Edgeforming hood fits on either base. Hose port angles maximize collection efficiency, keep hose out of the way. Includes vacuum hose adapter for use with 1-1/4'', 1-1/2'' and 35 mm hoses. Includes tool-free mounting hardware for each base..


Dastool Angle Grinder Dust Collection Attachment,Cutting Dust shroud 4-1/2 inch to 5 inch Dt1706
By Dastool
In Stock
$32.99

ean: 0653391559987,

4.4 out of 5 stars with 42 reviews
The Dastool Dt1706 offers best-in-class dust collection improves safety for user and the entire jobsite.Reduces clean up time and provides safer air for user.Offers easy toolless installation to maintain productivity, but without reducing safety.Single screw quickly adjusts and maintains desired depth of cut. Vacuum compatible without the need for adapters. Box Contains the following: 1x Dust Shroud,6 pcs clamping washer thickness 1.5-5.5mm,1x clamping flange, 1x shroud wrench,1x Universal Va


iVAC PRO 115-Volt Remote Control for Dust Collectors
By iVAC
In Stock
$89.99

mpn: RS11520-A-NA, ean: 0632181465332,

4.7 out of 5 stars with 56 reviews
Automate your dust collector with the iVAC Pro Dust Collector Remote Switch! Choose the Remote Switch that matches your dust collector's voltage, and enjoy the convenience of a remote control unit to turn your dust controller on and off with the press of a button. iVAC allows you to grow into a complete iVAC Pro system, including Tool Sensors and Blast Gates, and it's capable of reliably driving 115V dust collectors up to 1-1/2 HP repeatedly ON/OFF over and again - now that's real power!Fully ce


SawStop TSA-ODC Over-Arm Dust Collection Assembly
By SawStop
In Stock
$249.00

mpn: TSA-ODC, ean: 0733175325691,

4.6 out of 5 stars with 47 reviews
The Overarm Dust Collection Assembly removes dust up and out of the way. This unit is compatible with all SawStop Cast Iron saws (Jobsite Saw not included). Fits all SawStop T-Glide rail systems (not 30'' CNS rail kit). Connects directly to SawStop’s Dust Collection Blade Guard (TSG-DC required). Custom Y-Port unites above and below-table dust collection into one 4″ port.Compatible with the 36-inch and 52-inch SawStop Contractor Saws.. Fits all SawStop T-Glide rail systems. Requires Sawstop


Kenmore KC83QDKMZV06 Vacuum Floor Brush Genuine Original Equipment Manufacturer (OEM) Part
By Kenmore
In Stock
$37.79

mpn: KC83QDKMZV06,

4.9 out of 5 stars with 24 reviews
Genuine Original Equipment Manufacturer (OEM) parts! This floor brush (part number KC83QDKMZV06) is for vacuums. Floor brush KC83QDKMZV06 attaches to the wand assembly and is for cleaning hard flooring such as hardwood, vinyl and tile. Follow the instructions in the owner's manual when installing this part. For Kenmore.This part is compatible with models including; 11621514010,11621514011,11621514012,11623205111C,11621514013,11621614010. This is a manufacturer substitution. Part may differ in ap


Festool 202098 Bluetooth Remote Control For Ct
By Festool
In Stock
$45.00

mpn: 202098, ean: 4014549277225,

4.4 out of 5 stars with 46 reviews
The combination of Bluetooth® module on the CT dust extractor and remote control on the extractor hose saves you a trip to the extractor. Simply start the dust extraction from the hose using the remote control. Ideal for small, occasional cleaning tasks – simply switch to cleaning mode, even when the CT dust extractor is in auto mode. The Bluetooth® module on the CT dust extractor communicates with the Festool Bluetooth® battery packs in addition to the new remote control. These battery pac


Hardin DS7SL 7" Vacuum Metal Dust Shroud Cover with 3" ID & 1.5" Vacuum Connector
By Hardin
In Stock
$32.88

mpn: DS7SL, ean: 0645710005466,

4.5 out of 5 stars with 9 reviews
The dust shroud is designed for use with diamond cup wheels for floor grinding applications. The DS7SL is the Pro's choice for dust control when using a hand Grinder. Fits most 7'' grinders and captures airborne particles for outstanding dust control. Preserves air quality, protects workers from harmful silica dust, hexavalent chromium and silicosis with the industry's best Dustless grinding system. The DS7SL installs fast and easy. The height is adjustable to accommodate different cutting blade


Dyson Quick Release Wand (Purple), Part No. 969109-04, Designed for use with V7, V8, V10 and V11 cordless stick vacuums
By Dyson
In Stock
$59.99

ean: 0611417850173,

4.5 out of 5 stars with 18 reviews
Dyson Quick Release Wand (Purple) Part No. 969109-04 | Designed for use with V7, V8, V10 and V11 cordless stick vacuums |HIGH QUALITY QUICK RELEASE WAND - This genuine Dyson Quick Release Wand (Purple), Part No. 969109-04, is the perfect replacement wand for your Dyson Vacuum.. EASY INSTALLATION - With the Dyson quick release wand installation is a breeze. Start cleaning your house in a matter of seconds.. SLEEK AND STYLISH PURPLE - Who says cleaning can't be stylish? With this attractive purple


Household Supplies & Cleaning NEW Hose for Miele S314 S314i Non-Electric 54-1100-09 Replacement SHIP FROM USA
By Vacuum
In Stock
$68.69

mpn: VPA001, ean: 0747719596102,

4.1 out of 5 stars with 38 reviews
Hose for Miele S314 S314i Non-Electric 54-1100-09 Replacement Product Description Brand New - Unused Parts Top Quality, Generic Aftermarket Part - 30 Day Money Back Guarantee Includes (1) Hose as pictured Item Specifications: Hose for Miele Canister Vacuum Cleaners Replaces Part Number 54-1100-09 6 Foot Hose Compatible with Miele S314, S314I, Midsize, White StarHousehold Supplies & Cleaning NEW Hose for Miele S314 S314i Non-Electric 54-1100-09 Replacement SHIP FROM USA #004/49.


Festool 575668 Connecting Cable For CT Cyclone
By Festool
In Stock
$40.00

mpn: 575668, ean: 4014549331965,

4.9 out of 5 stars with 8 reviews
Connecting cable for retrofitting the ct-va pre-separator with an electrical outlet module.For retrofitting the ct-va pre-separator with additional electrical outlet Module. Enables particularly easy connection of the plug it suction hose with the ct-va pre-separator. Specifically designed for use with the ct-va 20 CT cyclone.


Kenmore KC96RDEMZC0D Vacuum Floor Nozzle Genuine Original Equipment Manufacturer (OEM) Part
By Kenmore
In Stock
$171.31

mpn: KC96RDEMZC0D,

4.2 out of 5 stars with 43 reviews
Genuine Original Equipment Manufacturer (OEM) parts! This floor nozzle (part number KC96RDEMZC0D) is for vacuums. Floor nozzle KC96RDEMZC0D connects to the end of the wand and removes dirt and debris on bare floors and carpets. Unplug the vacuum cleaner before installing this part. Wear work gloves to protect your hands. For Kenmore.This part is compatible with models including; 11658014700,11658015700. This is a manufacturer substitution. Part may differ in appearance but is a functional equiva


iVAC 4'' Metal Blast Gate MBG-04-NA Dust Collection
By iVAC
In Stock
$239.99

mpn: MBG-04-NA,

4.8 out of 5 stars with 12 reviews
4 inch Metal Blast Gate. Provides an automatic opening and closure of the dust extraction port from a power tool. When controlled by either a wireless rf connection from an iVAC Pro Product or from a 'Manual Wired Remote'. The iVAC Pro Blast Gates are electrically driven Automatic Blast gates. They are intended to be installed between the dust exhaust of a power tool and the main dust collector ducting to a dust collector. The Blast Gates are powered from a UL/CSA approved AC to AC adapter. Ther


Kenmore 8192774 Vacuum Hose Genuine Original Equipment Manufacturer (OEM) Part
By Kenmore
In Stock
$52.36

mpn: 8192774,

4.8 out of 5 stars with 35 reviews
Genuine Original Equipment Manufacturer (OEM) parts! This hose (part number 8192774) is for vacuums. Hose 8192774 carries dust and dirt from the surface you're vacuuming to the dust collector. Follow the instructions in your owner's manual when installing this part. For Kenmore.This part is compatible with models including; 11623204111C,11627514701,11629319802,11627514700,11629319803,11629319800,11627514702,11623312304,11623312305,11623312302,11623312303,11623312300,11625512504,11623312301,11625


Makita 196571-4 Dust Extraction Attachment, SDS-MAX, Demolition
By Makita
In Stock
$104.00
$59.99
You Save: 42%

mpn: 196571-4, ean: 0088381434225,

4.4 out of 5 stars with 56 reviews
The Makita Dust Extraction Attachment is engineered to work with Makita SDS-MAX Rotary Hammers and Demolition Hammers to efficiently extract dust from concrete demolition applications. The attachment features convenient hose holders that keep the hose from interfering with the operation of the tool. The Hammer Attachment is part of Makita's expanding line-up of dust extraction solutions, including the VC4710 Extract Vic (sold separately).Helps reduce dust created from breaking and chipping concr


iVac Pro Switch 115 Volt - 20 Amp #S11520NA
By iVAC
In Stock
$69.95

mpn: S11520-A-NA-1, ean: 0736211443311,

4.8 out of 5 stars with 29 reviews
Conquer the dust problem in your workshop with iVAC's automated dust control system! Connect any tool with a dust collection port, from your hand-held sander to your stationary cabinet saw, to iVAC's system and breathe easier! At the heart of iVAC's system is the Pro Switch, which automatically activates your shop vacuum or dust collector when you turn on a tool that is connected to the system. iVAC's Pro Switch installation is simple! Just plug the unit into an outlet and plug the shop vacuum o


Bosch HDC400 Hex Chiseling Dust Collection Attachment, 1-1/8"
By Bosch
In Stock
$111.69
$108.52
You Save: 3%

mpn: BSHNHDC400, ean: 0000346461312,

4.7 out of 5 stars with 16 reviews
The HDC400 dust collection attachment provides a unique dust collection system for breaker hammers. The ski-boot clamping band makes installation on the tool a snap. The clamp housing allows the attachment to be installed on the tool so that the dust collection shroud can be positioned near the chisel tip for optimum dust extraction. The clamp housing also can be adjusted up or down on the tool to accommodate a small variety of chisel lengths. The system also allows the dust collection shroud to



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - sterlingtoolsupply.com. All Rights Reserved.