Ball Nose / End Mills - Page 2


Save on Ball Nose (in End Mills) at Sterling Tool Supply, Page 2 [26]. Top brands include Cobra Carbide, Amana Tool, LittleMachineShop.com, HHIP, HQMaster, NG Tool, Kyocera, OSCARBIDE, YG-1, Niagara Cutter, Kodiak Cutting Tools, Titan, USA, & WKS TOOL. Hurry! Limited time offers. Offers valid only while supplies last.



Cobra Carbide 23410 Micro Grain Solid Carbide Long Length General End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Ball Nose End, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 4" Length (Pack of 1)
By Cobra Carbide
In Stock
$36.10

mpn: 23410, ean: 7241871161411,

4.7 out of 5 stars with 25 reviews
Cobra Carbide general end mill has center cutting geometry. Designed for milling, slotting, profiling and trace milling. Used for finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (


Amana Tool - HSS1214 High Speed Steel (HSS) Foam Cutting End Mill Extended Reach 1/2 Dia x
By Amana Tool
In Stock
$109.20

mpn: HSS1214, ean: 0738685121443,

4.3 out of 5 stars with 27 reviews
Cnc foam tools let you achieve depth and precision for thick foam carving applications. Ensure your foam projects are milled with accuracy and high detail, deep cuts in thick materials In fewer passes. For thick material Up-cut chip removal., #HSS1214, direction: Up-cut, (D) diameter: 1/2, (b) Cutting height: 6, (D) shank: 1/2, overall length (L): 8, max RPM: 6, 000, Type: Square end, flutes: 4, HSS1214 High Speed steel (HSS) foam cutting end mill extended reach 1/2 dia x 6 x 8 long x 1/2 shank


Amana Tool - 46284-K CNC 2D & 3D Carving 1 Deg Tapered Angle Ball Tip x 1/8 Dia x 1/16 R
By Amana Tool
In Stock
$62.40

mpn: 46284-K, ean: 0738685446287,

4.0 out of 5 stars with 33 reviews
Specially designed for 2D and 3D CNC profiling and carving in plastic & wood with CNC machines. The high-shear ball nose tips cut Smooth 2D and 3D contours with reduced stepping while the proprietary spektra coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-lo


6 Piece 4 Flute Ball End Mill Set, HSS
By LittleMachineShop.com
In Stock
$48.95

mpn: 2903, ean: 0736530757588,

4.1 out of 5 stars with 22 reviews
The ball end mill set comes in a wood stand.6 piece HSS end mill set. 4 flute ball (round end) end mills. Center cutting end mills. Includes 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 1/2'' end mills. 1/8'' through 3/8'' end mills have 3/8'' shank, 1/2'' end mills have 1/2'' shank.


HHIP 5835-0753 3/4 x 3/4" 4 Flute M42 Cobalt Single End Center Cut End Mill
By HHIP
In Stock
$43.98

mpn: 5835-0753, ean: 0769053095615,

4.6 out of 5 stars with 46 reviews
3/4 X 3/4'' 4 Flute M42 Cobalt Single End Center Cut End Mill ~ Ground From Solid ~ Center Cutting ~ for profiling, shoulder milling and finishing operations ~ AH ~ Choose cobalt end mills on hard work materials or when there is a problem with wear or short tool life. ~ Flute length is 1-5/8. ~ Overall length is 3-7/8.Ground From Solid. Center Cutting. For profiling, shoulder milling and finishing operations. 8% M42 Cobalt is designed to cut difficult and abrasive materials ranging from medium t


HQMaster CNC Router Bit Set (4 Type Each 10Pcs), Ball Nose End Mill Straight/Spiral Router Bit Titanium Coated Milling Cutter Engraving Grooving Cutting Slotting Combination Tool Acrylic Wood PVC MDF
By HQMaster
In Stock
$48.99
4.6 out of 5 stars with 16 reviews
Specifications: Type 1: 2 flutes 3.175mm shank flat nose spiral bits Upcut spiral router bits, made with solid carbide Shank diameter (SD): 3.175mm (1/8'') approx. Cutting edge diameter (CED): 3.175mm (1/8'') approx. Cutting edge length (CEL): 17mm Overall length (OAL): 38.5mm Quantity: Pack of 10 (coming with storage case) Type 2: 2 flutes 3.175mm shank ball nose bits Material: tungsten steel Shank diameter (SD): 3.175mm (1/8'') approx. Cutting edge diameter (CED): 2mm Cutting edge length (CE


3 pcs 3/16" 4 Flutes Ball End Solid Carbide Endmill, Cutting Diameter 3/16", Cutting Length 5/8", Over All Lenght 2"
By NG Tool
In Stock
$32.43

mpn: NG0107011, ean: 0769489462449,

4.0 out of 5 stars with 25 reviews
NG0107011 Not CoatedCutting Diameter 3/16''. Cutting Length 5/8''. Shank Diameter 3/16''. Over All Lenght 2''. Not Coated.


KYOCERA 1645-0625.590 Series 1645 Extended Reach Ball Nose End Mill, Uncoated, 30 Degree Angle, 2 Flute, 1/16" Cutting Diameter, 1/8" Shank Diameter,0.188" Cutting Length, 2" Length, 0.590" Reach
By Kyocera
In Stock
$34.34

mpn: 1645-0625.590,

4.9 out of 5 stars with 18 reviews
Kyocera has designed and manufactured tight tolerance carbide cutting tools and miniature parts for a broad range of markets including the electronics, industrial, medical and aerospace industries. We offer high-volume CNC grinding consistency in diameters from 0.0015'' (38um) to 0.264'' (6.70mm), tolerances as tight as 0.00025'' (.6um) and superior surface finishes.Extended Reach. 2 Flute. Ball Nose End Mill.


OSCARBIDE Carbide End Mills 7 pieces Radius(0.5mm 0.75mm 1mm 1.5mm 2mm 3mm 4mm) Ball Nose CNC Milling Cutter 2 Flutes Shank Spiral Deep Slotting Router bits for Engraving Milling 3D Relief Carving
By OSCARBIDE
In Stock
$31.99

ean: 0782500239547,

4.1 out of 5 stars with 59 reviews
Brand: OSCARBIDE Type: Ball Nose End Mill Material: Tungstencarbide TIAN Coated Flute:2 Flutes Size: Cutter Radius:0.5; Shank diameter:4mm ;OverallLength:50mm; Cutter Radius:0.75;Shank diameter:4mm ;Overall Length:50mm; Cutter Radius:1.0; Shank diameter:4mm ;Overall Length:50mm; Cutter Radius:1.5; Shank diameter:4mm ;Overall Length:50mm; Cutter Radius:2.0; Shank diameter:4mm ;Overall Length:50mm; Cutter Radius:3.0; Shank diameter:6mm ;Overall Length:50mm;  Cutter Radius:4.0; Shank dia


Cobra Carbide 21636 Micro Grain Solid Carbide Long Length General End Mill, TiAlN Coated, 2 Flute, 30 Degrees Helix, Ball Nose End, 1-3/4" Cutting Length, 3/8" Cutting Diameter, 4" Length (Pack of 1)
By Cobra Carbide
In Stock
$59.91

mpn: 21636,

4.4 out of 5 stars with 34 reviews
Cobra Carbide general end mill has center cutting geometry. Design for increased chip removal rate. Designed for slotting, profiling and plunging operations. Used for semi-finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, makin


YG-1 E2020 Cobalt Steel Ball Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 3.25" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
By YG-1
In Stock
$30.87

mpn: 43321,

4.7 out of 5 stars with 58 reviews
The YG-1 E2020 uncoated cobalt steel ball nose end mill has four flutes and a 30-degree helix angle for machining radius bottom slots, fillets, and special contours on a range of materials. Four flutes produce a better finish than fewer flutes. The tool’s ball nose creates contoured surfaces where sharp corners are not required. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-pu


Amana Tool - 46474 Metric CNC 2D & 3D Carving 1 Deg Tapered Angle Ball Tip x 3.2 Dia x 1
By Amana Tool
In Stock
$59.05

mpn: 46474, ean: 0738685464748,

4.5 out of 5 stars with 28 reviews
Specially designed for 2D and 3D CNC profiling and carving in plastic, aluminum & wood with CNC machines. The high-shear ball nose tips cut Smooth 2D and 3D contours with reduced stepping while the proprietary ZRN coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material c


Niagara Cutter N86172 Carbide Ball Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 2.5" Overall Length, 0.375" Cutting Diameter, 0.375" Shank Diameter
By Niagara Cutter
In Stock
$33.59

mpn: CB230-0.375-D3-B.0-Z2, ean: 0698036861728,

4.8 out of 5 stars with 28 reviews
The Niagara Cutter CB230 uncoated carbide ball nose end mill provides the better chip-carrying capacity and increased support of two flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s ball nose creates contoured surfaces where sharp corners are not required, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The end mill’s two flutes have better chip-carrying capacity


Cobra Carbide 21644 Micro Grain Solid Carbide Long Length General End Mill, TiN Coated, 2 Flute, 30 Degrees Helix, Ball Nose End, 1-1/2" Cutting Length, 3/8" Cutting Diameter, 6" Length (Pack of 1)
By Cobra Carbide
In Stock
$65.08

mpn: 21644,

4.8 out of 5 stars with 10 reviews
Cobra Carbide general end mill has center cutting geometry. Design for increased chip removal rate. Designed for slotting, profiling and plunging operations. Used for semi-finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends


Kodiak Cutting Tools KCT133527 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/2" Shank, 1" Length of Cut, 3" Overall Length, 1/2" Diameter
By Kodiak Cutting Tools
In Stock
$52.62

mpn: KCT133527, ean: 0789957412479,

4.8 out of 5 stars with 9 reviews
1/2 Inch Diameter Solid Carbide End Mill - Coated 1/2'' Shank 1'' Length of Cut 3'' Overall Length 4 Flute Carbide - ALTiN Coated Diameter Tolerance: +.000''/-.002''Shank Diameter Tolerance: -.0001''/-.0004''ALTIN is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This coating is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive


Titan TC11632 Solid Carbide End Mill, Regular Length, 4 Flute, Ball Nose, 30 degree Helix, AlTiN Coated, 1/2" Size, 1/2" Shank Diameter, 3" Overall Length, 1" Cutting Length
By Titan
In Stock
$53.00

mpn: TC11632,

4.5 out of 5 stars with 14 reviews
Titan Series 116 Solid Carbide End mills, Regular Length, 4 Flute, Ball Nose, 30 Degrees Helix, AlTiN Coated.Premium Sub-Microgram Solid Carbide. 4 Flute-Single End. Ball Nose. AlTiN Coated.


.375" 3/8" 4 Flute Extra Long Length Carbide Ball END Mill 3/8" x 3/8" x 3" x 6"
By USA
In Stock
$54.50

mpn: 175-4336,

4.4 out of 5 stars with 33 reviews
3/8''4 FLUTEEXTRA LONG LENGTHCARBIDE BALL END MILL6'' Overall Length3'' Flute LengthUncoatedMade in USA175-4336Carbide. 3/8'' Cutting Diameter. 3/8'' Shank Diameter. 6'' Overall Length. 4 Flute.


Wokesi Pack of 6Pcs,0.5 1.5 2 2.5 3 4mm Radius,Tungsten Steel Carbide,Ball Nose End Mill Set,HRC45,2Flutes,TiAlN Coated,CNC Router Bits Milling Profiling Tools(1/3/4/5/6/8mm HRC45)
By WKS TOOL
In Stock
$36.00

mpn: BEM6PC, ean: 0758910616346,

4.5 out of 5 stars with 50 reviews
6Pcs Ball Nose Endmills Size: A.R0.5 Cutter: 2Flutes,Cutting Radius=0.5mm,Shank Diameter=4mm,Overall Length=50mm. B.R1.5 Cutter: 2Flutes,Cutting Radius=1.5mm,Shank Diameter=4mm,Overall Length=50mm. C.R2 Cutter: 2Flutes,Cutting Radius=2mm,Shank Diameter=4mm,Overall Length=50mm. D.R2.5 Cutter: 2Flutes,Cutting Radius=2.5mm,Shank Diameter=6mm,Overall Length=50mm. E.R3 Cutter: 2Flutes,Cutting Radius=3mm,Shank Diameter=6mm,Overall Length=50mm. F.R4 Cutter: 2Flutes,Cutting Radius=4mm,Shank Diameter=8mm


5/8" 4 Flutes Ball End Solid Carbide Endmill, Cutting Diameter 5/8", Cutting Length 1-1/2", Over All Lenght 3-1/2"
By NG Tool
In Stock
$60.21

mpn: NG0107074, ean: 0769489463071,

4.7 out of 5 stars with 9 reviews
NG0107074 CoatedCutting Diameter 5/8''. Cutting Length 1-1/2''. Shank Diameter 5/8''. Over All Lenght 3-1/2''. Coating AlCrNa.



Viewing Page 2 of 2

Browse Our Catalog