Chamfer / End Mills - Huge Savings! Save up to 18%


Huge Savings! Up to 18% off on Chamfer (in End Mills) at Sterling Tool Supply [25]. Top brands include SPEED TIGER, Bassett, SHAVIV, Razor Tool, Niagara Cutter, Apollo Valves, Kodiak Cutting Tools, YLWSDDD, MOON CUTTER, Micro 100, & Fullerton Tool. Hurry! Limited time offers. Offers valid only while supplies last.



SPEED TIGER NC Spot Set - for General Spotting, Center Drilling, Chamfering - 4 Edge Indexable Insert, 45 deg. - 16 mm x 120 mm Shank - Set Includes Holder, 5X Inserts and Tool
By SPEED TIGER
In Stock
$99.00

mpn: SDCMI-SET, ean: 4712805504992,

4.6 out of 5 stars with 38 reviews
Insert-based NC Spot ToolThe new, patented NC Spot Insert Set from Speed Tiger features 4-sided inserts with a self-centering design, ensuring high stability and superior cut performance compared with other insert style spotting / chamfering tools. Speed Tiger's SH + ZrN coating reduces tool friction, allowing higher cutting speed with longer tool life. Each insert features 4 cutting surfaces, making this a very cost effective solution.Replaceable inserts mean no more replacing entire tools or w


Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
By Bassett
In Stock
$33.77

mpn: B10227, ean: 0662355329191,

4.1 out of 5 stars with 57 reviews
Bassett MCH Series single end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolhol


SHAVIV 90097 Tri-Flute Chamfering Kit
By SHAVIV
In Stock
$120.34

mpn: 90097, ean: 7296178498456,

4.0 out of 5 stars with 51 reviews
SHAVIV by Vargus is the original hand deburring tool in the market since the 1960's and is today distributed all over the world. SHAVIV is the answer to unwanted burrs on a wide variety of materials such as metal, plastics, wood and more. Wherever the burr, SHAVIV has the tool in its extensive range to solve your problem. Look to SHAVIV for the tools to do the finishing problems that a machine just can't handle. With SHAVIV there is no downtime, so you increase your productivity. Shaviv Part 900


Razor Tool 1/2" Dia 4 Flute 90 Degree Carbide Chamfer Cutter 1/4" LOC 3" Long
By Razor Tool
In Stock
$33.00

mpn: C90D500-4,

4.7 out of 5 stars with 16 reviews
Solid Carbide chamfering tools are an excellent choice for cutting chamfers and deburring machined edges in manual and CNC applications. 4 Flute design is optimized by relieving 2 flutes away from center to allow more efficient milling when cutting with the tipPremium Micrograin Carbide. High Surface Quality. Made In USA. Great for Deburring in the machine. Works in all materials.


Niagara Cutter N76602 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 1/4" Cut Cutting Length, 1/2" Diameter
By Niagara Cutter
In Stock
$75.38
$67.82
You Save: 10%

mpn: CM490-0.500-D1-C.0-Z4, ean: 0698036766023,

4.2 out of 5 stars with 52 reviews
Chamfering work pieces just got easier with Niagara Cutters new Chamfer Mills.These new mills are manufactured with the same extra-fine grain Carbide that is used in our ELITE Series of end mills. They also come standard with our exclusive Niagara Microshield TiAlN coating for higher productivity and the longest tool life. Niagara Cutter's carbide material is classified within the C1 to C4 range, and has an excellent combination of strength and toughness. Using raw materials with unique properti


Apollo Valves UGP17 1-1/4-inch - 2-inch Pipe Chamfer Tool (IPS)
By Apollo Valves
In Stock
$63.29
$61.00
You Save: 4%

mpn: UGP17, ean: 0670750439223,

4.8 out of 5 stars with 8 reviews
Conbraco 1-1/4'', 1-1/2'', 2'' IPS OD Chamfer tool.Creates a smooth chamfered pipe end. Accommodates 3 sizes of IPS pipe: 1-1/4-In, 1-1/2-In, 2-In. Suitable for PVC, CPVC, PE, ABS and PP. Carbide steel blade for durability and reusability.


Niagara Cutter N76601 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 3/16" Cut Cutting Length, 3/8" Diameter
By Niagara Cutter
In Stock
$44.49
$36.95
You Save: 17%

mpn: CM490-0.375-D1-C.0-Z4, ean: 0698036766016,

4.5 out of 5 stars with 34 reviews
Chamfering work pieces just got easier with Niagara Cutters new Chamfer Mills.These new mills are manufactured with the same extra-fine grain Carbide that is used in our ELITE Series of end mills. They also come standard with our exclusive Niagara Microshield TiAlN coating for higher productivity and the longest tool life. Niagara Cutter's carbide material is classified within the C1 to C4 range, and has an excellent combination of strength and toughness. Using raw materials with unique properti


Kodiak Cutting Tools KCT253565 USA Made Double End Solid Carbide Chamfer Mill, 90 Degree, 2 Flute, 3/8" Diameter, 3/8" Shank, 2-1/2" Overall Length
By Kodiak Cutting Tools
In Stock
$51.93

mpn: KCT253565,

4.2 out of 5 stars with 50 reviews
3/8 Inch Diameter Solid Carbide Chamfer Mill 3/8'' Shank 2-1/2'' Overall Length 2 Flute 90 Degree Carbide - Chamfer Mill.Made In the USA. 3/8 Shank Diameter. 2-1/2 Overall Length. 2 Flutes. 90 Degree.


Razor Tool 1/2" Dia 2 Flute 90 Degree Carbide Chamfer Cutter 1/4" LOC 3" Long
By Razor Tool
In Stock
$33.00

mpn: C90D500-2,

4.8 out of 5 stars with 40 reviews
Solid Carbide chamfering tools are an excellent choice for cutting chamfers and deburring machined edges in manual and CNC applications. 2 Flute design and also be used to spot drill holes in soft materials.Premium Micrograin Carbide. High Surface Quality. Made In USA. Great for Deburring in the machine. Works in all materials.


Kodiak Cutting Tools KCT252795 USA Made Solid Carbide Chamfer Mill, AlTiN Coated, 82 Degree, 2 Flute, 3/8" Shank, 3/8" Diameter, 2-1/2" Overall Length
By Kodiak Cutting Tools
In Stock
$36.07

mpn: KCT252795,

4.4 out of 5 stars with 26 reviews
3/8 Inch Diameter Solid Carbide Chamfer Mill 3/8'' Shank 2-1/2'' Overall Length 2 Flute 82 Degree Carbide - Chamfer Mill.Made In the USA. 3/8 Shank Diameter. 2-1/2 Overall Length. 2 Flutes. 82 Degree.


-1PCS,CNC Tungsten Carbide Aluminum And Steel Chamfer Milling Cutter,30&45&60 Degree Coated 3 Flutes End Mill A-12mmxD12x75-90deg
By YLWSDDD
In Stock
$69.58

mpn: 4039411746449, ean: 4039411746449,

4.0 out of 5 stars with 14 reviews
Material:CarbideType:End MillOverall Length:50 60 75MmMaterial:Carbide. Type:End Mill. Overall Length:50 60 75Mm.


Kodiak Cutting Tools KCT254203 USA Made Solid Carbide Chamfer Mill, Double End, 90 Degree, 4 Flute, 1/4" Diameter, 1/4" Shank, 2-1/2" Overall Length
By Kodiak Cutting Tools
In Stock
$33.28

mpn: KCT254203, ean: 0787269939295,

4.1 out of 5 stars with 46 reviews
1/4 Inch Diameter Solid Carbide Chamfer Mill 1/4'' Shank 2-1/2'' Overall Length 4 Flute 90 Degree Carbide - Chamfer Mill.Made In the USA. 1/4 Shank Diameter. 2-1/2 Overall Length. 4 Flutes. 90 Degree.


Kodiak Cutting Tools KCT252674 USA Made Solid Carbide Chamfer Mill, 100 Degree, 2 Flute, 1/2" Diameter, 1/2" Shank, 3" Overall Length
By Kodiak Cutting Tools
In Stock
$47.76

mpn: KCT252674,

4.1 out of 5 stars with 47 reviews
1/2 Inch Diameter Solid Carbide Chamfer Mill 1/2'' Shank 3'' Overall Length 2 Flute 100 Degree Carbide - Chamfer Mill.Made In the USA. 1/2 Shank Diameter. 3 Overall Length. 2 Flutes. 100 Degree.


Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
By Bassett
In Stock
$40.21

mpn: B10230, ean: 0662355329252,

4.6 out of 5 stars with 38 reviews
Bassett MCH Series double end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolhol


3/4" 45° HSS RH Chamfer Cutter
By MOON CUTTER
In Stock
$42.39

mpn: SAC75045,

4.5 out of 5 stars with 25 reviews
3/4''45 DEGREE HIGH SPEED STEEL SINGLE ANGLE CHAMFER CUTTER2-1/8'' Overall Length3/16''Cutter Width3/4'' Cutter Diameter3/8'' Shank8TeethMade in USAHigh Speed Steel. 3/4''. 3/8''. 2-1/8''. 8.


Micro 100 DT-250-060-010 60° Included Angle Dovetail Cutter, 2 Flute, Solid Carbide Tool, 0.250" Cutter Diameter, 1/4" Shank Diameter, 0.125" Cutter Length, 1/8" Neck Length, 0.120 Neck Diameter, 2-1/2" Overall Length
By Micro 100
In Stock
$66.75

mpn: DT-250-060-010, ean: 0728709127742,

4.1 out of 5 stars with 60 reviews
The MICRO 100 DT-250-060-010 uncoated, solid carbide, one piece, center cutting, 60° included angle, dovetail cutter. Designed and engineered for superior rupture strength and exceptional machining versatility when milling full dovetail grooves with drop hole allowance. Corner radii enhances tool strength and rigidity. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool's cutting edge/tip has a distinctive mirror like finish that significantly adds to mate


Fullerton Tool 34304 | 45-Degree 3/8" x 2-1/2" Solid Carbide FC18 Chamfer Mill
By Fullerton Tool
In Stock
$38.59

mpn: 34304, ean: 0768413420982,

4.0 out of 5 stars with 11 reviews
Located in Saginaw, Michigan, Fullerton Tool Company has been in operation for over 70 years and is a front-runner in the manufacturing of solid carbide cutting tools for a vast variety of industries. Fullerton's cutting tools can meet the most demanding tooling applications, so if your project calls for carbide cutting tools, look no further than Fullerton tools. Fullerton Tool Company is an ISO 9001:2008 certified company that continually provides quality solid carbide cutting tools to thousan


Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
By Bassett
In Stock
$33.77

mpn: B10229, ean: 0662355329238,

4.1 out of 5 stars with 44 reviews
Bassett MCH Series double end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolhol


Fullerton Tool 34311 | 45-Degree 3/4" x 4" Solid Carbide FC18 Chamfer Mill
By Fullerton Tool
In Stock
$173.71

mpn: 34311, ean: 0768413420852,

4.2 out of 5 stars with 28 reviews
Located in Saginaw, Michigan, Fullerton Tool Company has been in operation for over 70 years and is a front-runner in the manufacturing of solid carbide cutting tools for a vast variety of industries. Fullerton's cutting tools can meet the most demanding tooling applications, so if your project calls for carbide cutting tools, look no further than Fullerton tools. Fullerton Tool Company is an ISO 9001:2008 certified company that continually provides quality solid carbide cutting tools to thousan


Niagara Cutter N76600 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 1/8" Cut Cutting Length, 1/4" Diameter
By Niagara Cutter
In Stock
$32.24
$26.42
You Save: 18%

mpn: CM490-0.250-D1-C.0-Z4, ean: 0698036766009,

4.5 out of 5 stars with 12 reviews
Chamfering work pieces just got easier with Niagara Cutters new Chamfer Mills.These new mills are manufactured with the same extra-fine grain Carbide that is used in our ELITE Series of end mills. They also come standard with our exclusive Niagara Microshield TiAlN coating for higher productivity and the longest tool life. Niagara Cutter's carbide material is classified within the C1 to C4 range, and has an excellent combination of strength and toughness. Using raw materials with unique properti



Viewing Page 1 of 3

Browse Our Catalog