Straight, Spiral & Trim Bits / Router Bits - Page 2 - Mega Sale! Save up to 21%


Mega Sale! Up to 21% off on Straight, Spiral & Trim Bits (in Router Bits) at Sterling Tool Supply, Page 2 [150]. Top brands include MLCS, SpeTool, Whiteside Router Bits, LMT Onsrud, Amana Tool, SILIVN, & CMT. Hurry! Limited time offers. Offers valid only while supplies last.



MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece
By MLCS
In Stock
$82.66
$79.95
You Save: 3%

mpn: 200, ean: 0718122842759,

4.1 out of 5 stars with 37 reviews
Three solid micro grain carbide bits for fast, smooth cuts and an edge that stays sharp longer. Spiral bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove. They work well for deep mortises, cutting dadoes in a router table and any edge treatment done with the work facing upward.Solid micro grain carbide cuts smooth and stays sharp.. 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter. Perfect for deep mortises and cuttin


SpeTool Upcut Spiral Router Bits With 1/2 Inch Shank, 1/2 Cutting Diameter HRC55 Solid Carbide CNC End Mill For Wood mortises and cutting dadoes, Carving
By SpeTool
In Stock
$30.99

mpn: SP-D1/2-1/2-U,

4.4 out of 5 stars with 49 reviews
Solid Carbide spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 5/4 inch cutting length, 3 inch for total lengthSolid Carbide Up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.


Whiteside Router Bits 401 Basic Router Bit with 1/2-Inch Shank
By Whiteside Router Bits
In Stock
$110.25

mpn: 401, ean: 7535001836691,

4.5 out of 5 stars with 27 reviews
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in West


LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter
By LMT Onsrud
In Stock
$38.80
$32.39
You Save: 17%

mpn: 63-610, ean: 0895680015693,

4.3 out of 5 stars with 47 reviews
Routing End Mill, Upcut Spiral O-Flute, High Performance, Number of Flutes 1, Single End, Plunge Point End Style, Center Cutting Type, Right Hand Cut, Carbide, Uncoated Finish, Dia 1/8 In, Shank Dia 1/4 In, Length of Cut 1/2 In, Overall Length 2 In, Cut Angle 22 Deg, Helix Angle 22 Deg, For AluminumPower Cutting & Sawing. Country of manufacture: United States. Manufacturer: Onsrud.


Whiteside Router Bits 2715 Combination Flush Trim Bit with Top and Bottom Bearing
By Whiteside Router Bits
In Stock
$34.08

mpn: 2715, ean: 0844278027150,

4.8 out of 5 stars with 25 reviews
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in West


Amana Tool - 46170-K (Previous# 46169) CNC Solid Carbide Spektra Extreme Tool Life C
By Amana Tool
In Stock
$56.90

mpn: 46170-K, ean: 0738685994610,

4.7 out of 5 stars with 54 reviews
Special unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Flawless compression cuts.Our spektra bits feature a naco nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring naco provides additional improvements in four critical aspects of router tooling.Naco coating is a micro-thin c


SpeTool Upcut Spiral Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving
By SpeTool
In Stock
$47.99

mpn: SPLD1/4-1/4-U,

4.2 out of 5 stars with 15 reviews
Solid Carbide spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total lengthSolid Carbide Up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The


Engraving Bits, 2 Flutes Straight CNC V-bit 1/4 Inch Shank Marking Conical Engraving Router Tool for Steel Aluminum Brass MDF Wood by SILIVN - Tungsten Steel
By SILIVN
In Stock
$36.99

ean: 0191869957281,

4.1 out of 5 stars with 59 reviews
♦ WIDE USAGE - Mainly used for the engraving and marking of stainless steel, aluminum, brass, medium density fiberboard, wood panels, plastic and many other soft gummy materials. Great for rotary engraving with spring loaded engraving tools, CNC milling machines, collets, end mill holders and top loading engraving machines etc.♥18 months warranty, contact us: auto-five@hotmail【 PERFECT FOR MANICURIST OR BEGINNER】Engraving and lettering just got a little easier with SILIVN's Engraving CNC


Whiteside Router Bits RU4125 Standard Spiral Bit with Up Cut Solid Carbide 3/8-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
By Whiteside Router Bits
In Stock
$35.08

mpn: RU4125, ean: 7241871023085,

4.7 out of 5 stars with 25 reviews
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in West


Amana Tool 46403 SC Spiral Plunge 1/16 D x 1/2 CH x 1/4 SHK x 2 Inch Long Down-Cut Router Bit
By Amana Tool
In Stock
$37.46

mpn: 46403, ean: 0738685446409,

4.1 out of 5 stars with 44 reviews
Spiral router bits are made by Amana Tool, the leading manufacturers of high quality wood cutting tools. Amana Tool 46331 Solid Carbide Spiral Plunge 3/16 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long Down-Cut Router Bit combines a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean & accurate cut, while the augering action clears chips from the cut. The down-cut cuts from the surface down, leaving a smooth edge at the surface. SPECIFICAT


Amana Tool - 51377 Solid Carbide CNC Spiral 'O' Single Flute, Aluminum Cutting 1/4 Dia x 3
By Amana Tool
In Stock
$34.55

mpn: 51377, ean: 0738685513774,

4.3 out of 5 stars with 42 reviews
Using the highest quality sub-micrograin carbide These bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” Resulting In clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut, #51377, direction Up-cut, (D) diameter 1/4, (b) Cutting height 3/4, (D) shank 1/4, overall length (L) 2, flutes 1, 51377 Solid Carbide CNC spiral 'o' Single flute, alumin


SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill For Wood Carving, Plunge Cut
By SpeTool
In Stock
$47.99

mpn: SPLD1/4-1/4-D,

4.8 out of 5 stars with 51 reviews
Solid Carbide spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total lengthSolid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than str


CMT 806.690.11B Flush Trim Bit with Double Bearing, 2-Inch Cutting Length and 1/2-Inch Shank
By CMT
In Stock
$34.26

mpn: 806.690.11B, ean: 0664252035694,

4.1 out of 5 stars with 48 reviews
Innovative two-flute router bit equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials. Therefore it is no longer necessary to flip or move your tool if you need to ride it from either direction to the other side of your workpiece. You will benefit from this tool especially when routing curved elements along or against the grain. CMT orange bits have been rated the #1 overall router bits compared to other brands (Wood Magazine).3/4-In


Amana Tool - 47224 Miniature Flush Trim Plunge Template 1/4 Dia x 3/4 x 1/4" Shank Car
By Amana Tool
In Stock
$30.20

mpn: 47224, ean: 0738685472248,

4.1 out of 5 stars with 11 reviews
This exclusive miniature bit features a 1/4'' Diameter ball bearing guide that is much smaller than other ball bearing router bits on the market. Ideal for small fine work and delicate projects such as signmaking, guitarmaking/luthier, toymaking, routing letter edges, flush trimming, plunging tight corners and confined areas with high production., #47224, diameter (D) 1/4, cutting height (B) 3/4, shank (D) 1/4, overall length (L) 2-7/16, replacement bearing 47723, flutes 2, 47224 Miniature flush


Amana Tool - 49350 Multi-Rabbet Six Different Rabbet Depths 1-3/8 Dia x 1/2 Sha
By Amana Tool
In Stock
$42.00

mpn: 49350, ean: 0738685893500,

4.8 out of 5 stars with 37 reviews
The multi-rabbet bit steps in 1/16'' Increments from a 1/8'' Cut width to 1/2'', Simply by switching ball-bearing guides. Five different bearings are provided. Depth of cut capacity of 1/2''. Use in a handheld or table-mounted router., #49350 diameter (D) 1-3/8, cutting Height (B) 1/2, shank (D) 1/2, overall length (L) 2-3/8, flutes 2, C 1/8, 1/4, 5/16, 3/8, 7/16, 1/2, 49350 multi-rabbet six different rabbet depths 1-3/8 dia x 1/2 x 1/2 inch ShankDiameter (D) 1-3/8. Cutting height (B) 1/2. Shank


Whiteside Router Bits 1376B Bowl and Tray Bit with 1/4-Inch Radius 1-1/4-Inch Cutting Diameter and 1/2-Inch Cutting Length
By Whiteside Router Bits
In Stock
$36.08

mpn: 1376B, ean: 0844278070422,

4.8 out of 5 stars with 9 reviews
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in West


Whiteside Router Bits 1374B Bowl and Tray Bit - 1/4-Inch Radius, 3/4-Inch Cutting Diameter, 5/8-Inch Cutting Length, and 1/2-Inch Shank
By Whiteside Router Bits
In Stock
$33.01

mpn: 1374B, ean: 0844278070460,

4.7 out of 5 stars with 58 reviews
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in West


Whiteside Router Bits UDFT5152 Flush Trim Spiral Bit with Up/Down 1/2-Inch Cutting Diameter and 1-1/2-Inch Cutting Length
By Whiteside Router Bits
SKU: #412-UDFT5152
In Stock
$118.27

sku: 412-UDFT5152, mpn: UDFT5152, ean: 0844278007510,

4.8 out of 5 stars with 60 reviews
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer.UDFT5152. Flush Trim Spiral Bit. Industrial Quality.


Amana Tool - 47224-S Miniature Flush Trim Plunge Template 1/4 Dia x 1/4 Shank
By Amana Tool
In Stock
$31.20

mpn: 47224-S, ean: 0738685474228,

4.5 out of 5 stars with 35 reviews
This exclusive miniature bit features a 1/4'' Diameter ball bearing guide that is much smaller than other ball bearing router bits on the market. Ideal for small fine work and delicate projects such as signmaking, guitarmaking/luthier, toymaking, routing letter edges, flush trimming, plunging tight corners and confined areas with high production.This bit is essentially a plunge-cutting straight with a shank mounted ball-bearing pilot. It is a versatile bit, useful for template/pattern routing of


LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2" Cutting Length, 1/8" Cutting Diameter, 1/4" Shank Diameter, 2" Overall Length (Pack of 1)
By LMT Onsrud
In Stock
$36.20
$28.75
You Save: 21%

mpn: 65-012, ean: 0895680017260,

4.4 out of 5 stars with 29 reviews
The polished flute allows for razor sharp cutting edge and easy chip evacuation. Use for plastic, wood, aluminum and solid surface. Upcut spiral for improved chip evacuation.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use



Viewing Page 2 of 3